Home      Products      Download      Contact us        

     

                                    DSO-50x12 Series Digital Storage Oscilloscope

¡@

                                 Four in one  + Logic Analyzer  + FFT Spectrum Analyzer  + Electronics Counter  

¡@

  Features

   ¡´ Innovative cross triggering: logic analyzer channels can trigger the analog channels and vice versa.

   ¡´ Long time pre-triggering up to 262143*256 points, about -67M points.

   ¡´ Fast data capture and screen update rates.

   ¡´ Hot key function that is convenient to use.

   ¡´ Deep 512k/2M sample data acquisition buffers on each channel (A1, A2, A3, A4, D0 ~ D11).

   ¡´ Precision 200MHz Frequency counter, up to 7 digital resolution  @ 512k memory for each analog

      channel.

   ¡´ Advance Fast Fourier Transformations function to Bandwidth test.

   ¡´ Support Pulse width and TV(NTSC525, PAL625) Triggering and count.

   ¡´ Support  high speed (up to 50MHz SCL clock) I²C, SPI Triggering.

   ¡´ Support  I²C, SPI, UART, more... serial bus timing encode.

   ¡´ Convenient Timing state display for logic debug.

   ¡´ X Y Plot. 

   ¡´ Measurements.

  

  Main Screen

                                      

  

  SPI Trigger

  

 

 This figure shows 28 bits SPI Trigger. 

    

  I²C Trigger (Bytes + Ack)

  

 This figure shows 4 (bytes + Ack) I2C Trigger. 

   

  Trigger +Pulse Width

  

 

This figure shows 200ns +Pulse width Trigger at third count.

            

  Trigger -Pulse Width

   

 This figure shows 200ns -Pulse width Trigger at third count. 

    

  FFT Spectrum

            

                                   

           

    The FFT window allows control and display of FFT's.
    The following controls are available : 
    Window Select the FFT window type :

    (Triangular, Hanning, Hamming, Blackman-Harris, Rectangular, Wetch and Parzen).

   

   X-Y Plot

   
    

  

¡@

     Characteristic of DSO-50x12 Series :   

¡@

DSO-50212
  DSO-50212

    

    ¡¼ DSO-50212

  PC Based USB Interface (DSO, Logic Analyzer, FFT Spectrum Analyzer).

  Analog Channel : 2Ch (Ch.A1, Ch.A2).

  Digital Channel : 12Ch (D0 ~ D11) from Logic Analyzer Pod.

                           (Sampling Rate 500MHz, 2Mega Bytes Memory).

  Input Bandwidth : DSO (Ch.A1 200MHz, Ch.A2 125MHz).

                            Logic Analyzer (D0 ~ D11 150MHz).

  Trigger : Pulse width count, TV Horizontal Synchronous count (DSO).

               I²C, SPI (Logic Analyzer).

  Trigger Qualify : 0, 1, X (don't care) settings for all digital channels.

  Repetitive Mode : Up to 20GHz.

  FFT Spectrum Analyzer : 125MHz (Fast Fourier Transform).

  Electronic Counter : Max. 7 digital Resolution.

  X-Y Plot : Allow to graph one channel to another.

  Mathematics : +, -.

  Multi-Window : Yes.

  Operate : Mouse.

  Memory : 2Ch 2Mega Bytes (Scope), 12Ch 2Mega Bytes (Logic Analyzer). 

  Input Impedance : 1M£[/15pf (DSO), 100K£[/2p (Logic Analyzer).

  Sensitivity : 5mv/div to 2v/div.

  Sampling Rate : 1Ch 1Hz to 1GHz, 2Ch 1Hz to 500MHz.

  Threshold Voltage : -2v to +6v.

  External Clock : 0 to 50MHz 100K£[/2pf, +/-50Vmax.

  Power Supply : DC Adapter 12V/1A.

  Net Weight : 1.2 KGS.

  Size (Dimension) : 220mm x 142mm x 40mm (Aluminum Case).

                 Picture Enlarge

¡@

¡@

¡@

¡@
DSO-50412:
 DSO-50412

    

    ¡¼ DSO-50412

  PC Based USB Interface (DSO, Logic Analyzer, FFT Spectrum Analyzer).

  Analog Channel : 4Ch (Ch.A1, Ch.A2, Ch.A3, Ch.A4).

  Digital Channel : 12Ch (D0 ~ D11) from Logic Analyzer Pod.

                           (Sampling Rate 500MHz, 2Mega Bytes Memory).

  Input Bandwidth : DSO (Ch.A1, Ch.A3 200MHz, Ch.A2, Ch.A4 125MHz).

                            Logic Analyzer (D0 ~ D11 150MHz).

  Trigger : Pulse width count, TV Horizontal Synchronous count (DSO).

               I²C, SPI (Logic Analyzer).

  Trigger Qualify : 0, 1, X (don't care) settings for all digital channels.

  Repetitive Mode : Up to 20GHz.

  FFT Spectrum Analyzer : 125MHz (Fast Fourier Transform).

  Electronic Counter : Max. 7 digital Resolution.

  X-Y Plot : Allow to graph one channel to another.

  Mathematics : +, -.

  Multi-Window : Yes.

  Operate : Mouse.

  Memory : 4Ch 2Mega Bytes (Scope), 12Ch 2Mega Bytes (Logic Analyzer). 

  Input Impedance : 1M£[/15pf (DSO), 100K£[/2p (Logic Analyzer).

  Sensitivity : 5mv/div to 2v/div.

  Sampling Rate : 2Ch 1Hz to 1GHz, 4Ch 1Hz to 500MHz.

  Threshold Voltage : -2v to +6v.

  External Clock : 0 to 50MHz 100K£[/2pf, +/-50Vmax.

  Power Supply : DC Adapter 12V/2A.

  Net Weight : 1.8 KGS.

  Size (Dimension) : 225mm x 132mm x 60mm (Aluminum Case).

¡@

¡@

                Picture Enlarge

¡@

¡@

¡@

¡@

    DSO-50212 Hardware Specifications :

¡@

Model

                                          DSO-50212

                Remark

 Record Length

                                            2MB / Ch

                  Points

 Sampling Rate

        Ch.A1: 1Sa/s to 1Gsa/s

                              Ch.A2: 1Sa/s to 500MSa/s

                              D0 ~ D11:1Sa/s to 500MSa/s

 Realtrime: from 10Sa/s

 to 1Gsa/s.

 Software catch: from

 1Sa/s to 200Sa/s.

 External clock

                                  1KHz to 50MHz (max.)

From Logic Channel D0

 Timebase Accuracy

                                                50ppm

 
¡@ ¡@ ¡@

 Analog Channel

                                         Ch.A1, Ch.A2

          8bit resolution

 Input Bandwidth

                 ChA1: 200MHz (3db)

                 Ch.A2:100MHz (0.5db), 125MHz (1db)

 @BNC connect (Probe 10:1)

 Input Impedance

                                         1Mohm // 15pF

 @BNC connect (Probe 1:1)

 Max. input voltage

                                    50v (100v Transient)

 Input Sensitivity

                                       5mv/div to 2v/div

 Vertical Accuracy

       +/- 1.5%

 

 Trigger Sensitivity

                                       0.2 div (250MHz)

 

 Trigger Level

                                   Adjustable 250 level

     10 Vertical Divisions

 Trigger Type

             Slope +/-, Pulse width +/-, TV (NTSC / PAL),

             Horizontal Synchronous Count Trigger.

 Pulse detect < 16ns(min.)

 

 

 

 Digital Channel

                                      D0 ~ D11 (12ch)

              Logic Pod

 Input Bandwidth

                                     150MHz (max.)

 

 Input Impedance

                                     100K ohm || 2pF

 Input Sensitivity

                                     < 500mv

 Channel skew

                                     < 2ns

 Max. Input Voltage

                                 +/- 50v (100v Transient)

 Threshold Voltage

                                     -2v to +6v

            by 32mv step

 Trigger Qualify

                 Parallel: 0, 1, X (don't care) settings for all Digital channels

                 I²C: 0, 1, X (don't care) settings for 4 (bytes + Ack) long

 SPI: 0, 1, X (don't care) settings for 36bit long

 

 

 

 

 Operate

                                             Mouse

 

 Power Supply

         DC Adapter 12V/1A

 

 Power consumption

         USB +5V: <250mA+12V: <500mA

Total : 7.2 W

 PC Interface

          USB (Version 1.1/2.0)

 

 Net Weight

                                            1.2 KGS

 

 Size (Dimension)

         220mm x142mm x 40mm

         Aluminum Case

 Accessories

 Logic Analyzer pod, USB 2.0 cable.

 Calibrated Probe 300MHz (1:1, 10:1) x 2 pcs.

 User's Manual, Software CD.

 Housing with Color wires & clips x 16 pcs.

 DC Adapter 12V/1.0A.

 

    DSO-50412 Hardware Specifications : 

    Model

                                         DSO-50412

                Remark

 Record Length

                                            2MB / Ch

                  Points

 Sampling Rate

                          Ch.A1, Ch.A3: 1Sa/s to 1Gsa/s

                          Ch.A2, Ch.A4: 1Sa/s to 500MSa/s

                          D0 ~ D11:1Sa/s to 500MSa/s

  Realtrime: from 10Sa/s

  to 1Gsa/s.

 Software catch: from

 1Sa/s to 200Sa/s.

 not support for Ch.A3

 Ch.A4.

 External clock

                                  1 KHz to 50MHz (max.)

  From Logic Channel D0

 Timebase Accuracy

                                             50ppm

 
¡@ ¡@ ¡@

 Analog Channel

                            Ch.A1, Ch.A2, Ch.A3, Ch.A4

           8bit resolution

 Input Bandwidth

           Ch.A1, Ch.A3: 200MHz (3db)

         Ch.A2, Ch.A4:100MHz (0.5db), 125MHz (1db)

 @BNC connect (Probe 10:1)

 Input Impedance

                                         Mohm // 15pF

 @BNC connect (Probe 1:1)

 Max. input voltage

                                   50v (100v Transient)

 Input Sensitivity

                                    5mv/div to 2v/div

 Vertical Accuracy

                                         +/- 1.5 % 50v

 

 Trigger Sensitivity

                                      0.2div (250MHz)

 

 Trigger Level

                                  Adjustable 250 level

    10 Vertical Divisions

 Trigger Type

             Slope +/-, Pulse width +/-, TV (NTSC / PAL),

             Horizontal Synchronous Count Trigger.

 Pulse detect < 16ns(min.)

 

 

 

 Digital Channel

                                      D0 ~ D11 (12ch)

             Logic Pod

 Input Bandwidth

                                       150MHz (max.)

 

 Input Impedance

                                       100K ohm || 2pF

 Input Sensitivity

                                             < 500mv

 Channel skew

                                             < 2ns

 Max. Input Voltage

                                  +/- 50v (100v Transient)

 Threshold Voltage

                                          -2v to +6v

            by 32mv step

 Trigger Qualify

 Parallel: 0, 1, X (don't care) settings for all Digital channels.

 I²C: 0, 1, X (don't care) settings for 4 (bytes + Ack) long.

 SPI: 0, 1, X (don't care) settings for 36bit long.

 

 

 

 

 Operate

                                            Mouse

 

 Power Supply

        DC Adapter 12V/2A

 

 Power consumption

          USB +5V: <350mA+12V: <900mA

Total: 12W

 PC Interface

          USB (Version 1.1/2.0)

 

 Net Weight

                                           1.8 KGS

 

 Size (Dimension)

       225mm x 132mm x 60mm

          Aluminum Case

 Accessories

 Logic Analyzer pod, USB 2.0 cable.

 Calibrated Probe 300MHz (1:1, 10:1) x 4 pcs.

 User's Manual, Software CD.

 Housing with Color wires & clips x 16 pcs.

 DC Adapter 12V/2.0A.

 

¡@