Home Products Download Contact us
DSO-29xxA&B Digital Storage Oscilloscope
Five in one + Logic Analyzer + FFT Spectrum Analyzer + Electronics Counter + Clock Jitter Analyzer
Features
● Single shot sampling rate: Up to 1 GSa/S.
● Repeat sampling rate: Up to 20 GSa/S.
●170MHz bandwidth.
● Innovative universal triggering with 512 trigger levels :
all kind of triggering I²C, SPI, UART, cross trigger,
pre-triggering, Pulse width, TV(NTSC525, PAL625) Triggering and count .... etc.
8 channel logic analyzer can cross trigger to analog channel, vice versa.
● Expand to 36 channels logic analyzer.
● Measurements.
● Deep 4M /8M sample data acquisition buffers on each channel (A1, A2, A3, A4, D0 ~ D31).
● Precision 125MHz Frequency counter, up to 7 digital resolution @ 1mega memory for each analog
channel.
● Fast Fourier Transformations (FFT) function to Bandwidth test.
● Convenient Timing state display for logic debug.
● X Y Plot.
● Multi-Window software.
● DLL Libraries (optional)
Universal triggering with 512 trigger levels
Tradition digital storage oscilloscope only support one trigger level, like rising edge, falling edge, pulse
width....etc.
This DSO-29XXA/B support up to 512 trigger levels. It supports a lot of function rising edge, falling edge,
pulse width, delay, count...etc for every level.
It also support IF XX match n times then next level else jump back level 0 structure, so use these universal
triggering structure can easy solve any difficulty trigger problem. The following is some of these functions.
All example following can work both logic analyzer and scope channel.
(1) Trigger before delay :
(2) Pulse width :
(3) Cross Trigger :
Trigger source in any trigger level can set to scope channel A1, A2, A3, A4 or 8
channels logic analyzer.
This sample show trigger appear at trigger level 3 after level 1 scope trigger then
level 2 logic analyzer trigger.
(4) trigger count :
(5) SPI trigger :
It is a serial bus protocol with 3 channel signal .
It is not only support for logic analyzer but also for scope.
(6) I²C trigger :
It is a serial bus protocol with 2 channel signal.
It is not only support for logic analyzer but also for scope.
(7) UART (RS232) trigger:
It is a one channel serial bus protocol with time relative.
It is not only support for logic analyzer but also for scope.
Software with many window
This software show a lot of timing, let user easy to compare and analyze timing,
the following picture part A show at beginning of buffer and part B middle of buffer at the same time.
it can set different parameter in each window like zoom factor, location ..etc.
The FFT window allows control and display of FFT's.
The following controls are available :
Window select the FFT window type :
(Triangular, Hanning, Hamming, Blackman-Harris, Rectangular, Wetch and Parzen).
X-Y Plot
Characteristic of DSO-29xxA&B Series :
|
DSO-29xx A & B Series: |
|
|
DSO-2904B (G Series):
□ DSO-2904B-G-512 |
PC Based USB Interface (DSO, Logic Analyzer, FFT Spectrum Analyzer). Analog Channel : 4Ch (Ch.A1, Ch.A2, Ch.A3, Ch.A4). Digital Channel : 32Ch (D0 ~ D31) from Logic Analyzer Pod [Expand Pod]. (Sampling Rate 0 ~ 250MHz, 2Mega Bytes Memory). Input Bandwidth : DSO (Ch.A1, Ch.A3 170MHz, Ch.A2, Ch.A4.125MHz), Logic Analyzer (D0 ~ D31, 0 ~ 100MHz). Trigger : Universal 512 Levels (Parallel, Serial, Pulse width, I²C, SPI, TV Horizontal Synchronous..). Trigger Qualify : 0, 1, X (don't care) settings for all digital channels. Repetitive Mode : Up to 20GHz. FFT Spectrum Analyzer : 125MHz (Fast Fourier Transform). Electronic Counter : Max. 7 digital Resolution. X-Y Plot : Allow to graph one channel to another. Mathematics : +, -. Multi-Window : Yes. Operate : Mouse. Memory : 2Ch 8Mega Bytes (Scope), 4Ch 4Mega Bytes (Scope). 32Ch 2Mega Bytes (Logic Analyzer). Input Impedance : 1MΩ/15pf (DSO), 200KΩ/4p (Logic Analyzer). Sensitivity : 10mv/div to 4v/div. Sampling Rate : 2Ch 1Hz to 1GHz, 4Ch 1Hz to 500MHz. Threshold Voltage : -1.8v to +4.5v. External Clock : 0 to 100MHz 200KΩ/4pf, +/-50Vmax. Power Supply : DC Adapter 6V/3A. Net Weight : 1.8 KGS. Size (Dimension) : 220mm x 142mm x 40mm (Aluminum Case). |
|
|
|
|
DSO-2904A (G Series):
□ DSO-2904A-G2 |
PC Based USB Interface (DSO, Logic Analyzer, FFT Spectrum Analyzer). Analog Channel : 4Ch (Ch.A1, Ch.A2, Ch.A3, Ch.A4). Digital Channel : 32Ch (D0 ~ D31) from Logic Analyzer Pod [Expand Pod].. (Sampling Rate 0 ~ 250MHz, 512K Bytes Memory). Input Bandwidth : DSO (Ch.A1, Ch.A3 170MHz, Ch.A2, Ch.A4.125MHz), Logic Analyzer (D0 ~ D7, 0 ~ 100MHz). (D0 ~ D31, 0 ~ 10MHz). Trigger : Universal 512 Levels (DSO-2904A-G512). (Parallel, Serial, Pulse width, I²C, SPI, TV Horizontal Synchronous..). Universal (Simple) 2 Levels (DSO-2904A-G2). Trigger Qualify : 0, 1, X (don't care) settings for all digital channels. Repetitive Mode : Up to 20GHz. FFT Spectrum Analyzer : 125MHz (Fast Fourier Transform). Electronic Counter : Max. 7 digital Resolution. X-Y Plot : Allow to graph one channel to another. Mathematics : +, -. Multi-Window : Yes. Operate : Mouse. Memory : 2Ch 2Mega Bytes (Scope). 4Ch 1Mega Bytes (Scope). 32Ch 512K Bytes (Logic Analyzer). Input Impedance : 1MΩ/15pf (DSO), 200KΩ/4p (Logic Analyzer). Sensitivity : 10mv/div to 4v/div. Sampling Rate : 2Ch 1Hz to 1GHz, 4Ch 1Hz to 500MHz. Threshold Voltage : -1.8v to +4.5v. External Clock : 0 to 100MHz 200KΩ/4pf, +/-50Vmax. Power Supply : DC Adapter 6V/3A. Net Weight : 1.8 KGS. Size (Dimension) : 220mm x 142mm x 40mm (Aluminum Case). |
|
|
|
DSO-2902A
(G Series):
□ SO-2902A-G2 |
PC Based USB Interface (DSO, Logic Analyzer, FFT Spectrum Analyzer). Analog Channel : 2Ch (Ch.A1, Ch.A2). Digital Channel : 32Ch (D0 ~ D31) from Logic Analyzer Pod [Expand Pod]. (Sampling Rate 0 ~ 500MHz, 512K Bytes Memory). Input Bandwidth : DSO (Ch.A1 170MHz, Ch.A2 125MHz). Logic Analyzer (D0 ~ D7, 0 ~ 100MHz). (D0 ~ D31, 0 ~ 10MHz) Trigger : Universal 512 Levels (DSO-2902A-G512). (Parallel, Serial, Pulse width, I²C, SPI, TV Horizontal Synchronous..). Universal (Simple) 2 Levels (DSO-2902A-G2). Trigger Qualify : 0, 1, X (don't care) settings for all digital channels. Repetitive Mode : Up to 20GHz. FFT Spectrum Analyzer : 125MHz (Fast Fourier Transform). Electronic Counter : Max. 7 digital Resolution. X-Y Plot : Allow to graph one channel to another. Mathematics : +, -. Multi-Window : Yes. Operate : Mouse. Memory : 1Ch 2Mega Bytes (Scope), 2Ch 1Mega Bytes (Scope). 32Ch 1Mega Bytes (Logic Analyzer). Input Impedance : 1MΩ/15pf (DSO), 200KΩ/4p (Logic Analyzer). Sensitivity : 10mv/div to 4v/div. Sampling Rate : 1Ch 1Hz to 1GHz, 2Ch 1Hz to 500MHz. Threshold Voltage : -1.8v to +4.5v. External Clock : 0 to 100MHz 200KΩ/4pf, +/-50Vmax. Power Supply : DC Adapter 5.4V/2.4A. Net Weight : 1.4 KGS. Size (Dimension) : 220mm x 142mm x 40mm (Aluminum Case). |
|
|
|
|
DSO-2904A
(M Series):
□ DSO-2904A-M2 |
PC Based USB Interface (DSO, Logic Analyzer, FFT Spectrum Analyzer). Analog Channel : 4Ch (Ch.A1, Ch.A2, Ch.A3, Ch.A4). Digital Channel : 32Ch (D0 ~ D31) from Logic Analyzer Pod [Expand Pod]. (Sampling Rate 0 ~ 125MHz, 512K Bytes Memory). Input Bandwidth : DSO (Ch.A1, Ch.A3 125MHz, Ch.A2, Ch.A4 60MHz), Logic Analyzer (D0 ~ D7, 0 ~ 50MHz). (D0 ~ D31, 0 ~ 10MHz). Trigger : Universal 512 Levels (DSO-2904A-M512). (Parallel, Serial, Pulse width, I²C, SPI, TV Horizontal Synchronous..). Universal (Simple) 2 Levels (DSO-2904A-M2). Trigger Qualify : 0, 1, X (don't care) settings for all digital channels. Repetitive Mode : Up to 20GHz. FFT Spectrum Analyzer : 125MHz (Fast Fourier Transform). Electronic Counter : Max. 7 digital Resolution. X-Y Plot : Allow to graph one channel to another. Mathematics : +, -. Multi-Window : Yes. Operate : Mouse. Memory : 2Ch 1Mega Bytes (Scope), 4Ch 512K Bytes (Scope). 32Ch 512K Bytes (Logic Analyzer). Input Impedance : 1MΩ/15pf, 200KΩ/4p (Logic Analyzer). Sensitivity : 10mv/div to 4v/div. Sampling Rate : 2Ch 1Hz to 500MHz, 4Ch 1Hz to 250MHz. Threshold Voltage : -1.8v to +4.5v. External Clock : 0 to 100MHz 200KΩ/4pf, +/-50Vmax. Power Supply : DC Adapter 5.4V/2.4A. Net Weight : 1.8 KGS. Size (Dimension) : 220mm x 142mm x 40mm (Aluminum Case). |
|
|
|
|
DSO-2902A
(M Series):
□ DSO-2902A-M2 |
PC Based USB Interface (DSO, Logic Analyzer, FFT Spectrum Analyzer). Analog Channel : 2Ch (Ch.A1, Ch.A2). Digital Channel : 4Ch (D0 ~ D16) from Logic Analyzer Pod [Expand Pod]. (Sampling Rate 0 ~ 125MHz, 256K Bytes Memory). Input Bandwidth : DSO (Ch.A1 125MHz, Ch.A2 60MHz). Logic Analyzer (D0 ~ D3, 0 ~ 50MHz). (D0 ~ D15, 0 ~ 10MHz). DSO (125/60MHz), Logic Analyzer (50MHz). Trigger Levels : Universal 512 (DSO-2902A-M512). Universal 2 (DSO-2902A-M2). Trigger : Universal 512 Levels (DSO-2902A-M512). (Parallel, Serial, Pulse width, I²C, SPI, TV Horizontal Synchronous..). Universal (Simple) 2 Levels (DSO-2902A-M2). Trigger Qualify : 0, 1, X (don't care) settings for all digital channels. Repetitive Mode : Up to 20GHz. FFT Spectrum Analyzer : 125MHz (Fast Fourier Transform). Electronic Counter : Max. 7 digital Resolution. X-Y Plot : Allow to graph one channel to another. Mathematics : +, -. Multi-Window : Yes. Operate : Mouse. Memory : 1Ch 1Mega Bytes (Scope), 2Ch 512K Bytes (Scope). 4Ch 512K Bytes (Logic Analyzer). Input Impedance : 1MΩ/15pf (DSO), 200KΩ/4p (Logic Analyzer). Sensitivity : 10mv/div to 4v/div. Sampling Rate : 1Ch 1Hz to 500MHz, 2Ch 1Hz to 250MHz. Threshold Voltage : -1.8v to +4.5v. External Clock : 0 to 100MHz 200KΩ/4pf, +/-50Vmax. Power Supply : DC Adapter 5.4V/2.4A. Net Weight : 1.4 KGS. Size (Dimension) : 220mm x 142mm x 40mm (Aluminum Case). |
|
|
|
DSO-29xxA&B Series Hardware Specifications:
|
Model |
DSO-2904A-G512 DSO-2904B-G512 [1GHz] |
DSO-2904A-G2 [1GHz] |
Remark |
|
Sampling Rate |
2Ch 2MSa/s to 1GSa/s by 1, 2, 5 sequence 4Ch 1Sa/s to 500MSa/s by 1, 2, 5 sequence |
Internal clock |
|
|
External Clock |
0 to 100 MHz for logic analyzer 10 to 100 MHz for analog channel 200Kohm // 4pF, ±50V Max. |
From Channel D0 |
|
|
Record Length |
2Ch 2K/32K/256K/2Mega for DSO-2904A-G512 4Ch 1K/16K/128K/1Mega for DSO-2904A-G512 2Ch 2K/32K/256K/8Mega for DSO-2904B-G512 4Ch 1K/16K/128K/4Mega for DSO-2904B-G512 |
Point |
|
|
Analog Channel |
A1, A2, A3, A4 |
4 Ch |
|
|
Input Bandwidth |
2Ch DC - 170MHz 4Ch DC - 125MHz |
@BNC Connect |
|
|
Input Impedance |
1Mohm // 15pF |
|
|
|
Max. Input Voltage |
±50v (±100v Transient) |
|
|
|
Sensitivity |
10mv/div to 4v/div |
@Probe 1:1 |
|
|
Trigger Level (Universal) |
512 |
2 |
|
|
Repetitive Mode |
Up to 20 GHz |
|
|
|
Spectrum FFT |
150 MHz (Fast Fourier Transform) |
|
|
|
Electronics Counter |
Max. 7 Digits Resolution |
|
|
|
X - Y Plot |
Allow to graph one channel to another |
|
|
|
Math. |
+,- |
|
|
|
Multi-Window |
Yes |
|
|
|
Operate |
Mouse |
|
|
|
|
|
|
|
|
Digital Channel |
D0 ~ D7 (8Ch) D0 ~ D31 (32Ch) [Expand Pod] |
Logic Analyzer Pod |
|
|
Input Bandwidth |
D0 ~ D7 (8Ch) DC - 100MHz D0 ~ D31 (32Ch) DC - 10MHz |
|
|
|
Sampling Rate |
D0 ~ D7 (8Ch) 0 ~ 250 MHz D0 ~ D31 (32Ch) 0 ~ 25MHz |
|
|
|
Record Length |
512K for DSO-2904A-G2 512K for DSO-2904A-G512 2 Mega for DSO-2904B-G512 |
|
|
|
Input Impedance |
200Kohm // 4pF |
|
|
|
Max. Input Voltage |
±50v (±100v Transient) |
|
|
|
Threshold Voltage |
-1.8v ~ +4.5v |
by 36mv step |
|
|
Trigger Qualify |
0,1, X (don’t care) settings for all digital channels |
|
|
|
Trigger Level (Universal) |
512 |
2 |
|
|
|
|
|
|
|
Power Supply |
DC Adapter 6V/3.0A |
|
|
|
PC Interface |
USB 1.1/2.0 |
|
|
|
Net Weight |
1.8 KGS |
|
|
|
Size (Dimension) |
220mm x 142mm x 40mm |
Aluminum Case |
|
|
Accessories |
User's Manual, Calibrated Probe (1:1, 10:1) x 4 pcs. Logic Analyzer Pod, Color wires with clips x 36 pcs. USB 2.0 cable, Software CD, DC Adapter 6V/3.0A. |
|
|
|
Model |
DSO-2902A-G512 [1GHz] |
DSO-2902A-G2 [1GHz] |
Remark |
|
Sampling Rate |
1Ch 2MSa/s to 1GSa/s by 1, 2, 5 sequence 2Ch 1Sa/s to 500MSa/s by 1, 2, 5 sequence |
Internal clock |
|
|
External Clock |
0 to 100 MHz for logic analyzer 10 to 100 MHz for analog channel 200Kohm // 4pF, ±50V Max. |
From Channel D0 |
|
|
Record Length |
1Ch 2K/32K/256K/2Mega 2Ch 1K/16K/128K/1Mega |
Point |
|
|
Analog Channel |
A1, A2 |
2 Ch |
|
|
Input Bandwidth |
1Ch DC - 170MHz 2Ch DC - 125MHz |
@BNC Connect |
|
|
Input Impedance |
1Mohm // 15pF |
|
|
|
Max. Input Voltage |
±50v (±100v Transient) |
|
|
|
Sensitivity |
10mv/div to 4v/div |
@Probe 1:1 |
|
|
Trigger Level (Universal) |
512 |
2 |
|
|
Repetitive Mode |
Up to 20 GHz |
|
|
|
Spectrum FFT |
150 MHz (Fast Fourier Transform) |
|
|
|
Electronics Counter |
Max. 7 Digits Resolution |
|
|
|
X - Y Plot |
Allow to graph one channel to another |
|
|
|
Math. |
+,- |
|
|
|
Multi-Window |
Yes |
|
|
|
Operate |
Mouse |
|
|
|
|
|
|
|
|
Digital Channel |
D0 ~ D7 (8Ch) D0 ~ D31 (32Ch) [Expand Pod] |
Logic Analyzer Pod |
|
|
Input Bandwidth |
D0 ~ D7 (8Ch) DC -100MHz D0 ~ D31 (32Ch) DC - 10MHz |
|
|
|
Sampling Rate |
D0 ~ D7 (8Ch) 0 ~ 250MHz D0 ~ D31 (32Ch) 0 ~ 25MHz |
|
|
|
Record Length |
1Mega |
|
|
|
Input Impedance |
200Kohm // 4pF |
|
|
|
Max. Input Voltage |
±50v (±100v Transient) |
|
|
|
Threshold Voltage |
-1.8v ~ +4.5v |
by 36mv step |
|
|
Trigger Qualify |
0,1, X (don’t care) settings for all digital channels |
|
|
|
Trigger Level (Universal) |
512 |
2 |
|
|
|
|
|
|
|
Power Supply |
DC Adapter 5.4V/2.4A |
|
|
|
PC Interface |
USB 1.1/2.0 |
|
|
|
Net Weight |
1.4 KGS |
|
|
|
Size (Dimension) |
220mm x 142mm x 40mm |
Aluminum Case |
|
|
Accessories |
User's Manual, Calibrated Probe (1:1, 10:1) x 2 pcs. Logic Analyzer pod, Color wires with clips x 36 pcs. USB 2.0 cable, Software CD, DC Adapter 5.4V/2.4A. |
|
|
|
Model |
DSO-2904A-M512 [500 MHz] |
DSO-2904A-M2 [500 MHz] |
Remark |
|
Sampling Rate |
2Ch 50MSa/s to 500MSa/s by 1, 2, 5 sequence 4Ch 1Sa/s to 250MSa/s by 1, 2, 5 sequence |
Internal clock |
|
|
External Clock |
0 to 100 MHz for logic analyzer 10 to 100 MHz for analog channel 200Kohm // 4pF, ±50V Max. |
From Channel D0 |
|
|
Record Length |
2Ch 2K/32K/256K/1Mega 4Ch 1K/16K/128K/512K |
Point |
|
|
Analog Channel |
A1, A2, A3, A4 |
4 Ch |
|
|
Input Bandwidth |
2Ch DC - 125MHz 4Ch DC - 60MHz |
@BNC Connect |
|
|
Input Impedance |
1Mohm // 15pF |
|
|
|
Max. Input Voltage |
±50v (±100v Transient) |
|
|
|
Sensitivity |
10mv/div to 4v/div |
@Probe 1:1 |
|
|
Trigger Level (Universal) |
51 2 |
2 |
|
|
Repetitive Mode |
Up to 20 GHz |
|
|
|
Spectrum FFT |
110 MHz (Fast Fourier Transform) |
|
|
|
Electronics Counter |
Max. 7 Digits Resolution |
|
|
|
X - Y Plot |
Allow to graph one channel to another |
|
|
|
Math. |
+,- |
|
|
|
Multi-Window |
Yes |
|
|
|
Operate |
Mouse |
|
|
|
|
|
|
|
|
Digital Channel |
D0 ~ D7 (8Ch) D0 ~ D31 (32ch) [Expand Pod] |
Logic Analyzer Pod |
|
|
Input Bandwidth |
D0 ~ D7 (8Ch) DC - 50MHz D0 ~ D31 (32Ch) DC - 10MHz |
|
|
|
Sampling Rate |
D0 ~ D7 (8Ch) 0 ~125MHz D0 ~ D31 (32Ch) 0 ~ 25MHz |
|
|
|
Record Length |
256K |
|
|
|
Input Impedance |
200Kohm // 4pF |
|
|
|
Max. Input Voltage |
±50v (±100v Transient) |
|
|
|
Threshold Voltage |
-1.8v ~ +4.5v |
by 36mv step |
|
|
Trigger Qualify |
0,1, X (don’t care) settings for all digital channels |
|
|
|
Trigger Level (Universal) |
512 |
2 |
|
|
|
|
|
|
|
Power Supply |
DC Adapter 6V/3.0A. |
|
|
|
PC Interface |
USB 1.1/2.0 |
|
|
|
Net Weight |
1.8 KGS |
|
|
|
Size (Dimension) |
220mm x 142 mm x40mm |
Aluminum Case |
|
|
Accessories |
User's Manual, Calibrated Probe (1:1, 10:1) x 4 pcs. Logic Analyzer Pod, Color wires with clips x 36 pcs. USB 2.0 cable, Software CD, DC Adapter 6V/3.0A. |
|
|
|
Model |
DSO-2902A-M512 [500MHz] |
DSO-2902A-M2 [500MHz] |
Remark |
|
Sampling Rate |
1Ch 50MSa/s to 500MSa/s by 1, 2, 5 sequence 2Ch 1Sa/s to 250MSa/s by 1, 2, 5 sequence |
Internal clock |
|
|
External Clock |
0 to 100 MHz for logic analyzer 10 to 100 MHz for analog channel 200Kohm // 4pF, ±50V Max. |
From Channel D0 |
|
|
Record Length |
1Ch 2K/32K/256K/1Mega 2Ch 1K/16K/128K/512K |
Point |
|
|
Analog Channel |
A1, A2 |
2 Ch |
|
|
Input Bandwidth |
2Ch DC - 125MHz 4Ch DC - 60MHz |
@BNC Connect |
|
|
Input Impedance |
1Mohm // 15pF |
|
|
|
Max. Input Voltage |
±50v (±100v Transient) |
|
|
|
Sensitivity |
10mv/div to 4v/div |
@Probe 1:1 |
|
|
Trigger Level (Universal) |
512 |
2 |
|
|
Repetitive Mode |
Up to 20 GHz |
|
|
|
Spectrum FFT |
110 MHz (Fast Fourier Transform) |
|
|
|
Electronics Counter |
Max. 7 Digits Resolution |
|
|
|
X - Y Plot |
Allow to graph one channel to another |
|
|
|
Math. |
+,- |
|
|
|
Multi-Window |
Yes |
|
|
|
Operate |
Mouse |
|
|
|
|
|
|
|
|
Digital Channel |
D0 ~ D3 (4Ch) [8Ch Trigger] D0 ~ D15 (16Ch) [Expand Pod] |
Logic Analyzer Pod |
|
|
Input Bandwidth |
D0 ~ D3 (4Ch) DC - 50MHz D0 ~ D15 (16Ch) DC - 10MHz |
|
|
|
Sampling Rate |
D0 ~ D3 (4Ch) 0 ~ 125MHz D0 ~ D15 (16Ch) 0 ~ 25MHz |
|
|
|
Record Length |
256K |
|
|
|
Input Impedance |
200Kohm // 4pF |
|
|
|
Max. Input Voltage |
±50v (±100v Transient) |
|
|
|
Threshold Voltage |
-1.8v ~ +4.5v |
by 36mv step |
|
|
Trigger Qualify |
0,1, X (don’t care) settings for all digital channels |
|
|
|
Trigger Level (Universal) |
512 |
2 |
|
|
|
|
|
|
|
Power Supply |
DC Adapter 5.4V/2.4A |
|
|
|
PC Interface |
USB 1.1/2.0 |
|
|
|
Net Weight |
1.4 KGS |
|
|
|
Size (Dimension) |
220mm x 142mm x 40mm |
Aluminum Case |
|
|
Accessories |
User's Manual, Calibrated Probe (1:1, 10:1) x 2 pcs. Logic Analyzer pod, Color wires with clips x 20 pcs. USB 2.0 cable, Software CD. DC Adapter 5.4V/2.4A. |
|
|